| Width - Between
Rail Width: 13 in., 15 in., 17 in., 19 in., 21 in., 23 in., 25 in., 27
in., 31 in., 33 in., 37 in., 39 in., 43 in., 47 in., 51 in., and 55 in.
Frame - 4 in. deep x 1-5/8 in. flange x 4 ga. powder painted formed
steel channel with bolt-in cross members set high, welded cross members
set low.
Butt Couplings - For bolting sections together.
Curves - 30°, 45°, 60° and 90° with
32-1/2 in. inside radius for widths up to 27 in., 48 in. inside radius
for 31 in. to 39 in. between rail widths.
Straight Section Rollers - 2-1/2 in. dia. x 11 ga. steel tubing.
Bearings are labyrinth sealed and grease packed.
Curved Section Rollers - 2-1/2 in.
dia. x 11 ga. unplated steel tubing. Bearings are labyrinth sealed and
grease packed.
Axles - 11/16 in. hex shaft, spring loaded.
Capacity - See Load Capacity Chart below.
|
