| FLOOR
SUPPORTS |
 |
| MS Type floor
supports are available with a wide range of adjustment. Specify top
of belt or roller elevation. One support required at every bed joint
and ends of conveyor. Holes in feet for lagging to floor. Knee braces
recommended above MS-6 support. |
| BELT
* |
|
| Black or white
Polymate 100 RMP-COS (cover one side), Black Trackmate 447 Roughtop
with PVC cover, Brown Polymate Roughtop w/Nitrile cover, Black Trackmate
533 COS-PVC, Tan Glidetop, Pure Gum Rubber Roughtop. |
| BELT
SPEED * |
|
| Other constant
and variable speeds. V-belt drive supplied on speeds under 17 FPM. |
| CENTER
DRIVE |
|
| Provides 16
in. of belt take-up. Minimum elevation 20 in. Specify location. Minimum
OAL 66 in. |
| GUARD
RAILS |
|
| Continuous
adjustable channel, solid side guards, PC side guards with formed
top.. Fixed Channel overlapping, one direction (use with systems ends
only). Fixed Channel non-overlapping, reversing (use with system ends
only). |
|
| CASTERS |
|
| Support casters
are available in 4 In. or 6 In. diameter. Casters are available in
with Steel or Rubber wheels and can be supplied with wheel brakes.
|
| POLY-TIER
SUPPORTS |
|
| 36 in. to 120
in. support heights in 6 in. increments. Knee braces supplied. |
| CEILING
HANGERS |
|
| 5/8 in. dia.
x 8 ft. long unplated rods fully threaded. Other lengths and galvanized
rods available. |
| MOTORS |
|
| Energy efficient,
single phase, other characteristics. 2 HP maximum. |
| ELECTRICAL
CONTROLS |
|
| Many common
electrical controls are available. These items include: One direction
manual start switch, reverse drum switch, non-reversing and reversible
magnetic starters, push button stations, AC variable frequency drives.
Look for these components in the ELECTRICAL Category. |
|
