BED - Roller bed with 1.9 in. dia. roller x 16 ga. galvanized tube spaced every 3 in. Mounted in 6 1/2 in. x 12 ga. powder painted formed steel channel frame bolted together with butt coupling.
CROSS BRACING - Rods with turnbuckle are fastened to underside of bed to provide proper alignment of bed rollers and insure correct product tracking. Supplied on every other section 30 ft. bed lengths and over.
CENTER DRIVE - Can be placed in any section of conveyor 7'-6" or longer. Center drive is 18 in. OAW on all widths.
DRIVE PULLEY - 8 in. dia. with 1 7/16 in. dia. shaft at bearings.
TAIL PULLEY - 6 in. dia. with 1 3/16 in. dia. shaft at bearings, machine crowned.
TAKE-UP PULLEY - 6 in. dia. with 1 in. dia. shaft crowned.
SNUB IDLER - Adjustable 2-1/8 in. dia. pre-lubricated ball bearings.
RETURN IDLER - Adjustable 1.9 in. dia. pre-lubricated ball bearings.
TAKE-UP - Take-ups in center drive provide 16 in. of belt take-up.
BEARINGS - Sealed, pre-lubricated, self-aligning, ball bearings on drive, tail pulleys. Pre-lubricated ball bearings in tread and pressure rollers.